开泰主营:杭州铝合金锯片 | 杭州金属锯片 | 杭州板式锯片 | 杭州多片锯 | 各种非标锯片定做

新闻资讯

推荐产品

新闻资讯

当前位置: 网站首页 > 新闻资讯
  • 切铁切铝锯片安装有哪些要求?
  • 本站编辑:杭州开泰锯业有限公司发布日期:2018-06-16 19:27 浏览次数:

è¨éé

切铁切铝锯片安装要求:

Installation requirements for cutting iron cutting aluminum saw blade:

1、 检查锯片有无损坏,齿型是否完整,锯板是否平整光洁,以及有无其他异常现象,以确保使用安全。

1, check whether the saw blade is damaged, whether the tooth type is complete, whether the sawing board is smooth and smooth, and whether there are other abnormal phenomena, so as to ensure the safety of use.

2、设备状态良好,主轴无变形,无径跳,安装固定牢固,无振动等现象 。

2, the equipment is in good condition, the spindle has no deion, no skip, solid installation, no vibration and so on.

3、 装配时,确定锯片箭头方向与设备主轴旋转方向一致。

3. When assembling, make sure that the direction of the saw blade arrow is in accordance with the rotation direction of the main shaft.

4、 锯片安装时要保持轴心,卡盘和法兰盘的清洁,法兰盘内径与锯片内径一致,确保法兰盘与锯片紧密结合,装好定位销,拧紧螺母。法兰盘的大小要适当,外径应不小于锯片直径的1/3。

4, when the blade is installed, the shaft center, the disc and the flange plate should be kept clean, the inner diameter of the flange plate is in accordance with the inner diameter of the saw blade, and the flange plate is tightly combined with the saw blade, and the positioning pin is installed and the nut is tightened. The size of the flange shall be appropriate, and the outer diameter shall be not less than 1/3 of the saw blade diameter.

5、 设备开动前,确保安全的情况下,有单人操作设备,点动空转,检查设备转向是否正确,有无振动、锯片装好后先空转几分钟,无打滑、摆动或跳动后正常工作。

5, before the equipment is opened, to ensure the safety of the equipment, there is a single operation equipment, move empty, check the equipment turn right or not, there is no vibration, saw blade first empty for a few minutes, without skidding, swinging or beating normal work.


友情链接:GT彩票平台  GT彩票开户  W彩票  大无限彩票官网  M5彩票官网  M5彩票注册  杏彩彩票官网  天天彩票平台  88彩票开户  拉菲彩票官网  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!